The bituminous membrane ROOFLEX is a special waterproofing membrane proper for inclined roofs with tiles. The membrane is easily applied with mechanical fixing and produced in rolls of long length and light weight. It is reinforced by a non woven polyester. The lower surface is protected by a polyethylene film and the upper surface is protected by polyethylene film or quartz sand.
PHYSICAL AND CHEMICAL CHARACTERISTICS
- absolute watertightness
- good tensile strength and elongation
- tear resistant
- resistant to static loading
The roll dimensions are 30m long and 1m wide (other rolls dimensions are available on request). The rolls are supplied on wooden pallets and are held in position by a heat shrunk plastic bag.
INSTRUCTIONS FOR USE
The membranes are applied easily with mechanical fixing. Side and end laps must be at least 10 cm.